Discount KeylessProgramming

REMOTE PROGRAMMING

  1. Get in your vehicle, close and unlock all doors using the power unlock switch on the drivers door. Insert the key into the ignition
  2. Switch the key as far to the ON position as it will go without starting, then back to OFF EIGHT (8) times within a 10 second period. Each cycle will count as ONE (1)
  3. On the EIGHTH (8th) key turn to the ON position, DO NOT turn the key OFF. At this point, the vehicle doors will automatically lock and unlock indicating the programming mode has been entered successfully.
  4. Within 7 ½ seconds, pick up the new remote then press and release the LOCK button. The vehicle doors will automatically lock and unlock indicating the new remote has been accepted.
  5. Repeat STEP 4 for all remaining remotes you wish to program (You can program up to 4 remotes total).
  6. After all remotes have been programmed, switch the key to the OFF position and remove from the ignition.
  7. Test all remotes to ensure they are functioning. If any did not program, restart the programming procedure from STEP 1 and switch the order in which you are programming the remotes.

Type your paragraph here.

Please make sure to have all remotes you want to work with the vehicle, new and old, with you at the time of programming as absent remotes will discontinue to function until reprogrammed.

You can also find this information located in your owners manual. Please read through the programming before attempting. 

Need Programming Help? Click here!

Ford / lincoln / mercury programming

Will work on some Mazda models as well​

2000-2007 FORD FOCUS Owners CLICK HERE
​2012+ FORD FOCUS Owners CLICK HERE

KEY PROGRAMMING

**NOTE** You must have two factory transponder keys that currently start the vehicle in order to attempt the following programming. If you do not have the two keys required for the programming then the keys will require a trip to either a dealership or an automotive locksmith for the programming. We recommend contacting a dealership for pricing as well as visiting www.autolocksmithfinder.com. Generally the programming will all be done the same way so we recommend taking the key(s) to whoever provides you with the best quote.

  1. Get in your vehicle, close and unlock all doors using the power unlock switch on the drivers door. Insert the first key into the ignition
  2. Switch the key as far to the ON position as it will go without starting and leave it in the ON position for three (3) seconds
  3. Switch the key to the OFF position and remove the first key
  4. Insert the second key into the ignition and switch to the ON position as far as it will go without starting and leave in the ON position for three (3) seconds.
  5. Switch the key to the OFF position and remove the second key
  6. Insert the new key into the ignition and switch to the ON position as far as it will go without starting for two (2) seconds
  7. Test the key to ensure it functions by starting the vehicle. If it did not program, restart the programming procedure from STEP 1. If it did program and you have additional keys to program, restart the programming procedure from STEP 1.