Discount KeylessProgramming

Acura / honda programming

Please make sure to have all remotes you want to work with the vehicle, new and old, with you at the time of programming as absent remotes will discontinue to function until reprogrammed.

You can also find this information located in your owners manual. Please read through the programming before attempting. 

REMOTE PROGRAMMING

  1. Get in your vehicle, close and unlock all doors using the power lock switch on the driver’s door.
  2. Perform the following steps three (3) times in a row. Each step must be completed within four (4) seconds of the last:
  3. Using a working key, insert the key into the ignition cylinder and turn to the ON position as far as it will go without starting and leave in the ON position.
  4. Using any remote, press and release the LOCK button
  5. Switch the key to the OFF position
  6. After STEP 3 – 5 has been performed 3 times in a row, turn the key to the ON position as far as it will go without starting and leave in the ON position, then press the LOCK button on the same remote you have been using.
  7. At this point the vehicle door locks should automatically lock and unlock, indicating that the programming mode has been activated. (If door locks do not cycle automatically then the programming procedure has failed and you need to restart the procedure from STEP 1.
  8. Once the door locks stop cycling, press the LOCK button on the same remote you have been using. The door locks should automatically lock and unlock indicating that the remote programming has been accepted.
  9. Repeat STEP 8 for all remaining remotes you wish to program (You can program up to 4 remotes total)
  10. Once you have programmed all of your remotes, exit the programming mode by turning the key off and removing from the ignition.
  11. Test all remotes to ensure they are functioning. If any did not program, restart the programming procedure from STEP 1 and switch the order in which you are programming the remotesType your paragraph here.

KEY PROGRAMMING

​     Keys will require a trip to either a dealership or an automotive locksmith for the programming. We recommend contacting a dealership for pricing as well as visiting www.autolocksmithfinder.com. Generally the programming will all be done the same way so we recommend taking the key(s) to whoever provides you with the best quote.